how to make a batch of 5f-mdmb-pica?

So I ordered a gram of this. How am I supposed to make a blend or a juice?

Last blend I made was FUB-PB-22 and I think I used 3mL naptha per 1g damiana, adding about 300mg into either 3.5 or 7g damiana?

I have no tolerance right now so I am trying to make a blend that won't freak me out. How potent is it? How much plant material would you put 1g inside of?

Please someone answer and help me out with this. It would be very helpful! Thanks!

If your source is good and you are a non tolerant user I suggest starting with 100mg on 7-8 grams of herb so if it is too weak you will not loose much of your chemical. And after that you will can make it stronger or lower depends on your taste.

Okay thank you so much this is exactly the advice I'll follow. How much isopropyl should I use for that?

Depend on the method you use to make your blends. When I make mine I use pure acetone because is evaporate fast and for example at 20 grams of herb I use 20ml of acetone. You should use as low as you can. Just be sure there is enough isopropyl to cover the plants,but not more.

Okay so the measurement doesn't have to be absolutely exact in other words.

The only reason I have to use isopropyl is because things have been hectic in life lately. To put a long story short I don't have acetone in my house and my car I just bought and it doesn't have a license plate on it yet because there are some issues with my insurance so I can't just go buy some within a day or two.

So basically what I was going to do is weigh out 7g, see how much of the small Mason jar that it fills. Then put it aside and add about that much (maybe a tad more) isopropyl and mix the 100mg chemical in. Shake until diluted. And then dump the plant material in and shake like nobodies business for awhile.

Then after it's all soaked in I'll open it and stir it around slowly until it's mostly evaporated and fully saturated on the plants. Then just spread it out onto a Pyrex so that it has more surface area to evaporate and let a fan evaporate it until dry.

Think this would work?

I use pure acetone because is evaporate fast and because I live in Europe and this is all I can get. I use to put the chemical into a small glass recipient put the acetone into it dissolve it then with an syringe take it from there. After that in an other glass recipient (jar) put the blends there put all the dissolved acetone into it mix it well like 3-5 minutes open the top of the recipient closing again mix it again open it and then let it dry. From acetone with this method they are already infused with the chemicals and all most dried. Sorry for my english, I hope you understand me.